1/15/03 Offsets

rizwank · Post by **rizwank** » Wed Jan 15, 2003 1:16 pm

[MacroQuest]
MacroQuestVersion=IRC-20030111
ClientName=eqgame
ClientVersion=Wed Jan 15 03:04:xx 2003
ClientOverride=0
MacroQuestWinClassName=__MacroQuestTray
MacroQuestWinName=MacroQuest

[Function Locations]
WriteChatColor=00539A86
GetRaceByID=0052F6FB
GetClassByID=0052F1B6
GetDeityByID=00530611
LeftClick=00533152
RightClick=005485D9
ScreenItem=004B1D91
ScreenSpawn=00548BCA
NewUIINI=00439E60
MaxMana=004BB2C5
Commands=00547153
CmdCleanup=00539A59

[DirectInput8]
Main=0083FF50
Keyboard=0083FF54
Mouse=0083FF58

[Memory Locations]
Zoning=00828060
Zones=00828074
SpawnHeader=00828078
Items=0082807C
Doors=00828098
SpawnFooter=008280AC
Char=008280C0
CharInfo=008280C8
Target=008280CC
Guilds=0082887C
Packs=00641B68
Mouse=0083FF5C
Attack=00825BDE
Spells=0083C908
CommandList=006116E8
DoAbilityList=007FEC94
DoAbilityAvailable=007FC20C
Group=007BF8B8
GroupCount=007BF770
HSliderItems=007BF964
HSliderMoney=007C38D4
PackPanel1=00828168
PackPanel2=0082816C
clsMain=00828154
clsItems=008280F0
clsSpawns=00828070
clsInvPanel=00098F98
clsMerchantPanelStatus=0005F388
clsMerchantItemBase=
clsMerchantSelectedItem=0006343C
clsMerchantSelectedSlotID=
clsMainNewUI=008400EC
clsMainSpellRefresh=00000E34
clsMainSpellMemId=
clsMainSpellMemBar=
clsMainSpellMemGem=

Thanks to kaz for these.

The Client version stuff is just overridden for now and some of the spell stuff hasnt been found .. if you all out there post corrections ill fix em.

ap50 · Post by **ap50** » Wed Jan 15, 2003 2:46 pm

Bah, Riz ya slacker..

ClientVersion=Wed Jan 15 03:04:xx 2003
ClientOverride=0

YKW-28983 · Post by **YKW-28983** » Wed Jan 15, 2003 3:16 pm

ap50 wrote:Bah, Riz ya slacker..

ClientVersion=Wed Jan 15 03:04:xx 2003
ClientOverride=0

as he mentioned he needs to override for it to work.

kaz · Post by **kaz** » Wed Jan 15, 2003 3:42 pm

Please use these corrections

[DirectInput8]
Mouse=0083FF58

[Memory Locations]
Mouse=0083FF5C

as for the missing struct offsets, I dont believe they've changed from last patch.

kaz

ap50 · Post by **ap50** » Wed Jan 15, 2003 3:44 pm

YKW-28983 wrote:
ap50 wrote:Bah, Riz ya slacker..

ClientVersion=Wed Jan 15 03:04:xx 2003
ClientOverride=0
as he mentioned he needs to override for it to work.

Doesn't make him any less of a slacker

Grumpy · Post by **Grumpy** » Wed Jan 15, 2003 4:56 pm

I never saw any offsets posted for after the "remove the Old UI" patch, as a result, I haven't tried Plaz's fix to still get the old UI. I'll try it with these offsets, see if anything useful happens.

As soon as I can login that is...

kaz · Post by **kaz** » Wed Jan 15, 2003 5:52 pm

<JohnQ> GetDeityByID=00530611

chuckle · Post by **chuckle** » Thu Jan 16, 2003 12:27 pm

Yah that missing spell info is screwin stuff up....
Like when u mem a spell that normally popped up right away for use, it not like takes 2-3 seconds for it to pop up, and when your casting a direct dmg spell that has no recast time, and then u hit jboots and try to cast it again right away, (chain casting) you cannot, and it say's "you haven't recovered yet"...... u gotta wait like 2 seconds before you can cast the direct damage spell again. (was on a wizard at this time, casting spells that were normally able to be chain casted; aka no recast time; and now theyre messed up) Plz look into the spell info, or tell me if we need to use the same spell info from the last patch~ Thx, and i know you guys are prolly swamped in shit as it is.

Doodman · Post by **Doodman** » Thu Jan 16, 2003 1:38 pm

You problem is probably with a change VI/Sony made in the last patch.

Sony/VI wrote in their patch message:

Raised all recast times below 2.25 seconds up to 2.25 seconds. This is a change in the spell data as the first part of a two-part change needed to correct the "Recast time not met" problem. More information is available at the Developer's Corner at www.everquest.com.

YKW-28983 · Post by **YKW-28983** » Sun Jan 19, 2003 4:53 pm

Any word on the missing offsets on the bottom?

meep · Post by **meep** » Sun Jan 19, 2003 7:18 pm

with the new version and new offsets (with the correct macroquest.ini) I crash as soon as I try and type anything or move my mouse...

I'm running xp pro with the latest version of EQW...

Any ideas?

ExTiz · Post by **ExTiz** » Tue Jan 21, 2003 7:00 pm

Doodman wrote: Sony/VI wrote in their patch message:
Raised all recast times below 2.25 seconds up to 2.25 seconds. This is a change in the spell data as the first part of a two-part change needed to correct the "Recast time not met" problem. More information is available at the Developer's Corner at www.everquest.com.

No more Jbooting to cast the same spell twice in a row real fast

ap50 · Post by **ap50** » Tue Jan 21, 2003 7:02 pm

Wow, welcome to last week.

tildon · Post by **tildon** » Thu Jan 23, 2003 2:55 am

why is it when i use offsets :
[MacroQuest]
MacroQuestVersion=IRC-20030111
ClientName=eqgame
ClientVersion=Thu Jan 09 03:57:xx 2003
ClientOverride=1
MacroQuestWinClassName=__MacroQuestTray
MacroQuestWinName=MacroQuest

MQ works and yours it doesnt?

tildon · Post by **tildon** » Thu Jan 23, 2003 2:56 am

I mean I m using override Yes..but you arent..
but yours are working you say?

1/15/03 Offsets

1/15/03 Offsets

spell stuff- important