MacroQuest64

Posted: **Thu Jan 16, 2003 11:26 pm**

any items in stacks = crash.

Posted: **Fri Jan 17, 2003 12:50 am**

So to make this work I go to run, then type

ntsd -G -c "eb 0055C8A7 0;g" c:\path\to\eqgame.exe patchme
??
cause when I do that it says something about ntsd not being there or something?? I am using windows 98.

Posted: **Fri Jan 17, 2003 2:05 am**

NM

Zav

Posted: **Fri Jan 17, 2003 3:26 am**

Oh god, my sides hurt, sorry

Posted: **Fri Jan 17, 2003 4:02 am**

Sangoku

You can still run EQ in the OLD UI under Windows XP:

Posted: **Fri Jan 17, 2003 4:14 am**

Doesn't work for me... i get the following :

Code: Select all


Microsoft (R) Windows User-Mode Debugger  Version 5.1.2600.0
Copyright (c) Microsoft Corporation. All rights reserved.

CommandLine: e:\everquest\eqgame.exe patchme
Loaded dbghelp extension DLL
The call to LoadLibrary(ext) failed with error 2.
Please check your debugger configuration and/or network access
Loaded exts extension DLL
The call to LoadLibrary(uext) failed with error 2.
Please check your debugger configuration and/or network access
Loaded ntsdexts extension DLL
Symbol search path is: *** Invalid *** : Verify _NT_SYMBOL_PATH setting
Executable search path is:
ModLoad: 00400000 00845000   image00400000
ModLoad: 77f40000 77fee000   ntdll.dll
ModLoad: 77e40000 77f38000   C:\WINDOWS\system32\kernel32.dll
ModLoad: 773a0000 77b9c000   C:\WINDOWS\system32\SHELL32.dll
ModLoad: 77be0000 77c33000   C:\WINDOWS\system32\msvcrt.dll
ModLoad: 77c40000 77c80000   C:\WINDOWS\system32\GDI32.dll
ModLoad: 77d10000 77d96000   C:\WINDOWS\system32\USER32.dll
ModLoad: 77da0000 77e3c000   C:\WINDOWS\system32\ADVAPI32.dll
ModLoad: 78000000 78086000   C:\WINDOWS\system32\RPCRT4.dll
ModLoad: 772a0000 77304000   C:\WINDOWS\system32\SHLWAPI.dll
ModLoad: 21100000 2115f000   e:\everquest\mss32.dll
ModLoad: 76af0000 76b1d000   C:\WINDOWS\System32\WINMM.dll
ModLoad: 00850000 00971000   C:\WINDOWS\system32\ole32.dll
ModLoad: 71a30000 71a39000   C:\WINDOWS\System32\WSOCK32.dll
ModLoad: 71a10000 71a25000   C:\WINDOWS\System32\WS2_32.dll
ModLoad: 71a00000 71a08000   C:\WINDOWS\System32\WS2HELP.dll
ModLoad: 6d2f0000 6d326000   C:\WINDOWS\System32\DINPUT8.dll
ModLoad: 76330000 7634c000   C:\WINDOWS\System32\IMM32.dll
Break instruction exception - code 80000003 (first chance)
eax=00251eb4 ebx=7ffdf000 ecx=00000003 edx=77f5eb08 esi=00251eb4 edi=00251f48
eip=77f667cd esp=0013fb38 ebp=0013fc2c iopl=0         nv up ei pl nz na pe nc
cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00000202
*** ERROR: Symbol file could not be found.  Defaulted to export symbols for ntdl
l.dll -
ntdll!DbgBreakPoint:
77f667cd cc               int     3
0:000> ntsd: Reading initial command 'eb 0055C8A7 0;g'
ModLoad: 5cf00000 5cf25000   C:\WINDOWS\System32\ShimEng.dll
ModLoad: 7c290000 7c46f000   C:\WINDOWS\AppPatch\AcGenral.DLL
ModLoad: 77bb0000 77bc4000   C:\WINDOWS\System32\MSACM32.dll
ModLoad: 77bd0000 77bd7000   C:\WINDOWS\system32\VERSION.dll
ModLoad: 75a10000 75ab7000   C:\WINDOWS\system32\USERENV.dll
ModLoad: 5b0f0000 5b124000   C:\WINDOWS\System32\UxTheme.dll
ModLoad: 62e10000 62e18000   C:\WINDOWS\System32\LPK.DLL
ModLoad: 72f10000 72f6a000   C:\WINDOWS\System32\USP10.dll
ModLoad: 78090000 78174000   C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Cont
rols_6595b64144ccf1df_6.0.10.0_x-ww_f7fb5805\comctl32.dll
ModLoad: 77310000 7739b000   C:\WINDOWS\system32\comctl32.dll
ModLoad: 10000000 10027000   D:\PROGRA~1\TEXTBR~1.0\Bin\TBMHOOK.dll
ModLoad: 72f70000 72f93000   C:\WINDOWS\System32\WINSPOOL.DRV
ModLoad: 76ca0000 76cbf000   C:\WINDOWS\System32\NTMARTA.DLL
ModLoad: 76f20000 76f4d000   C:\WINDOWS\system32\WLDAP32.dll
ModLoad: 71b70000 71b81000   C:\WINDOWS\System32\SAMLIB.dll
ModLoad: 01420000 01e85000   e:\everquest\EQGfx_Dx8.DLL
ModLoad: 6de90000 6dfb6000   C:\WINDOWS\System32\d3d8.dll
ModLoad: 6de80000 6de86000   C:\WINDOWS\System32\d3d8thk.dll
ModLoad: 01e90000 01edf000   e:\everquest\dpvs.dll
time()-cpuSpeed:1546733
TimeGetTime-cpuSpeed: 1560630
ModLoad: 73260000 73265000   C:\WINDOWS\System32\mscat32.dll
ModLoad: 76bf0000 76c1b000   C:\WINDOWS\System32\WINTRUST.dll
ModLoad: 76260000 762e9000   C:\WINDOWS\system32\CRYPT32.dll
ModLoad: 76240000 7624f000   C:\WINDOWS\system32\MSASN1.dll
ModLoad: 76c50000 76c72000   C:\WINDOWS\system32\IMAGEHLP.dll
ModLoad: 0ffd0000 0fff3000   C:\WINDOWS\System32\rsaenh.dll
ModLoad: 03000000 0443d000   E:\Macroquest\EQLib.dll
ModLoad: 28000000 280a2000   E:\Macroquest\Perl56.dll
ModLoad: 1eb40000 1eb4b000   D:\Office51\TRAYHOOK.dll
[MacroQuest]Expected Client version: Wed Jan 15 03:04:xx 2003
[MacroQuest]    Real Client version: (null)
Access violation - code c0000005 (first chance)
eax=00000011 ebx=0249415a ecx=00000011 edx=00002000 esi=00000000 edi=0259df7c
eip=0305256c esp=025936b8 ebp=025936c4 iopl=0         nv up ei pl nz na po nc
cs=001b  ss=0023  ds=0023  es=0023  fs=0038  gs=0000             efl=00010206
*** WARNING: Unable to verify checksum for E:\Macroquest\EQLib.dll
EQLib!__ascii_strnicmp+1c:
0305256c 8a26             mov     ah,[esi]                ds:0023:00000000=??
0:006>

Posted: **Fri Jan 17, 2003 8:56 am**

There are a few steps missing. Detailed instructions:

1. Click Start, Run, then type in cmd and hit OK. This will call up a command line (i.e. DOS) window.
2. In that window, change to your EQ directory. In my case

Code: Select all

cd\everquest

3. Enter Plazmic's command at the command prompt

Code: Select all

ntsd -G -c "eb 0055C8A7 0;g" c:\everquest\eqgame.exe patchme

4. This will cause a new window to spawn, where you will see a bunch of debug output. Ignore it, but do not close it. EQ will pop up momentarily.
5. When you are done with EQ, exit out and THEN close the two DOS windows.

The important thing here is that Plazmic's command has to be executed in the same directory that EQ is located in, or it won't find the files it needs to debug/patch.

Hope this helps clear up things for a few people.

Posted: **Fri Jan 17, 2003 11:24 am**

Another option is to create a second shortcut on your desktop with the debug command.

1. Make new shortcut.
2. Right click on new icon, Take the Properties tag.
2a. Select the SHORTCUT tab
3. Where it says TARGET use the code provided by Plazmic.
4. Click Apply.

You now have two icons to launch EQ one for NEWUI and one for OLDUI.

Bolo

Posted: **Fri Jan 17, 2003 2:14 pm**

now it says bad command!?!?!?!

Posted: **Fri Jan 17, 2003 3:55 pm**

==sangoku22==

Please help me out here. You say you are using Win98 correct?

ntsd is the debugger for win2k/XP. So you don't even have this binary and even if you were to try and lift this and use it on 98, it wouldn't work.

Pay Billy more money and get XP so I can get a raise plz

I couldn't take the pain from my sides hurting anymore

Posted: **Sat Jan 18, 2003 10:48 pm**

kazan wrote:only problem ive seen so far with the new offset is that if i pick up anything on my cursor i crash =(

I have this same problem

Posted: **Sun Jan 19, 2003 4:32 am**

Using Windows 2000 OS, have latest offsets from the offset thread and am also running the newer 0055C8A7 command. This brings up a windowed version of EQ with the old UI. However I am still getting the beforementioned left-click stack crash (easily surpassed, just dont click) however I'm also getting the original can't use the left click problem that appeared with the new EQ patch. not sure If I'm missing anything. Any ideas?

Posted: **Mon Jan 20, 2003 11:02 am**

Hi...

Ok it works ..however i have a window size problem..the game starts and i have eq in a window ..ok..but it not my computer size..if i make it to 800-600 i get a small window..if i make it higher it s a window on my desktop..

And I started for example the /macro bagit equip
it tells me usage left click right click mouseloc..

Any ideas to solve this 2 problems?

(I dont get any crashes like the other people seem to have though)

Posted: **Wed Jan 22, 2003 5:48 pm**

Any ways i can get EQW to work?

Posted: **Thu Jan 23, 2003 3:45 am**

I'm running EQW 2.32 without problem with MQ.

MacroQuest64

Anyone that still wants the old UI...

??

More complete instructions

dang...

ntsd=Symbolic Debugger for Windows 2000

Crash when picking up stuff on cursor.

Crash Problem, Click Problem

yea....