Rogue Helper v6.0 [Complete Rogue Macro] (Updated: 10-26-04)

[skyler]

Your leash is too tight.

And no, that is not a flame or a wise crack. That is the answer to your question.

[necroman]

i foudn a work around of just makeing a /tell roguename /attack but was hopeing i wouldnt even have to do that. However atleast its only 1 hotkey to press rather that switchign over to other pc and hitting it.

[skyler]

read the thread over and understand completely what this macro does and what it can do. since you clearly didn't do that before, you don't even understand the answer given you. check your leash settings on the rogue macro. "Your leash is too tight" and thus your rogue is out of ranger to assist and attack.

[necroman]

its not a leashing problem because i have leashign turned off.

Also has anyone ever noticed that to turn autoninja back on after you turn it off you have to go into the ini and change it becasue the command does not work /autoninja on doesnt activate it. ah shit mayeb its autoninja true ill have to try that when i get back home.

[skyler]

Does it take work to be as stupid as you?

http://www.sharemation.com/jerle69/eq/RHDocs.html

look up leash, leashflex, autoninja, dumbass, asshat, lazybitch

opps! Guess you wouldn't need help on those last 3. you seem to have that covered

[necroman]

wow i can feel the flames starting. how can it be leashing if leashing is TURNED OFF. so skyler since i obviuosly didnt read how to get this to work dont bother helpign anymore. And just fyi, it amazing how much of this macro is working since i didnt read anything. Why are some people here such assholes (NOT EVERYONE). Maybe its because you need to get laid or hav ea meal cooked by someone other than your mom.

Necroman

[skyler]

I'd ask the same question only why so many have to be so lazy and have everything hand fed to them. for every asshole you'll see on this board, you'll find 3 lazy idiots like necroman. Also, I THOUGHT you were asking a question for but the life of me, I didn't see a single question mark. hmm, go figure.

[necroman]

yea it must be lazy or a dumbass because hollyshit if someone were to misunderstand anythign in this forum or not understand somethign they just must be lazy.

[skyler]

yea it must be lazy or a dumbass because hollyshit if someone were to misunderstand anythign in this forum or not understand somethign they just must be lazy.

At this point, you sir are both. 99% of all questions have already been answered.

[necroman]

its both. anyone else have any suggestions?

[fearless]

skyler already knows my suggestion!

oh, and ++!

[skyler]

skyler already knows my suggestion!

oh, and ++!

remind me again. your opinion and friendship are so important to me

[fearless]

skyler already knows my suggestion!

oh, and ++!

remind me again. your opinion and friendship are so important to me :roll:

omgz! use the damn search engine! I shouldn't have to remind you of anything!

OH! and another ++!

[A_Druid_00]

I'm just curious how long it will be before the thread gets locked and people get banzored!

[rzmonk76]

Important Notice:
RH will not function correctly, particularly in combat and more specifically with strike execution, unless you do the following things before using the macro:
Make sure you have autoattack on assist OFF (/assist off)
Modify your HOTKEY assist button to be ONLY an assist command and the following line:

/echo Seeking a Victim...

In other words, make a hotkey with the following two lines:

/assist main
/echo Seeking a Victim...


If you fail to do these things, RH will function poorly!

NOT AUTOASSISTING (targeting)

-delete your ini and start over. dont copy and paste your old one, just start over.

-end and restart the macro

-your target may be out of two set saftey/idiot checks. your "leash" and your "stickdist". Stickdist was intergrated intot the macro for two reasons. One was to prevent you from chasing a runner too far from your party and runing into adds or looking like a jackass. or running out to the mob even before it gets to the partys camp. leash is there to run you back to the camp if you get too far away from it after you've ran down a roamer or just to prevent "creep" where a raid force's melee starts to creep away from the safe spot or their own healers!. remember ranges CH=100, rememdy=200 most group heals=70, HOT=100 group HOT=120. set leash to something crazy like /leash 300 same with the "stickdist" /stickdist 300 800 "stickdist <max_target_range> <max_range_2_assist_man> if your assist man is the puller and he drops off a mob to get eaten and runs away you may lose stick if he runs out of your designated range.


NOT ENGAGING AT DESIGNATED PERCENT

-macro seems to engage and react faster for me when all 3 assist checks are set. /mainassist <MA1name> /secondassist <MA2name> /thirdassist <MA3name>

TARGET BUT WONT STICK

-this macro wont stick to players or any pets PC's or NPC's.

-toggle targetswich off, if your MA is looking at something other than what your attacking you will stop sticking to your target if your targetswitch setting is on. the MA might be a puller and will run off away from the party after he dumps off a mob. If he is a good proactive MA and looks for another target when the currently powed mob is getting very low this may happen too. you want targetswitch on for certain situtions like if the raid strat requres it. or if the MA switches targets because the one he's on has been mezed and common sense says he should switch to something that is not mezed and beating on healers, slowers, and enchanters.

-see above referances to "leash" and "stickdist" settings