Code: Select all
|** Unknownerror's first macro -
Credits to robdawg and his hunter macro, this uses a load of code from it. screwju and the AFK Looting Macro all of the returning to group code is from that, lastly Fluffy and the Bard Auto Aquire Target Macro had to snag some of the auto targeting code from it..
usage: /macro pull.mac
Note: the loc you start the macro at will be the loc you auto pull the mobs you find back to. so dont start the macro till your grp is at camp and gtg. **|
Sub Main
|------------------------------------------------------------
|How many times should aquire target fail before delaying?
|------------------------------------------------------------
/declare RV_FailMax int outer 3
|------------------------------------------------------------
|How far would you like to target a mob?
|------------------------------------------------------------
/declare RV_MaxRadius int outer 150
|------------------------------------------------------------
|How far is the combat range?
|------------------------------------------------------------
/declare RV_Range int outer 10
|------------------------------------------------------------
|What is the minimum Z Value of mobs I should target?
|------------------------------------------------------------
/declare RV_MinZRange int outer -1000
|------------------------------------------------------------
|What is the maximum Z Value of mobs I should target?
|------------------------------------------------------------
/declare RV_MaxZRange int outer 1000
|------------------------------------------------------------
|Variables that you don't need to worry about.
|------------------------------------------------------------
/declare RV_FailCounter int outer 0
/declare RV_MyTargetID int outer 0
/declare RV_MyTargetName string outer
/declare RV_MyTargetDead int outer 0
/declare RV_InvalidTargetID int outer 0
/declare RV_HasTarget int outer 0
/declare RV_RandomWait int outer 0
/declare RV_LootSlot int outer 0
/declare RV_CheckLook int outer 0
/declare RV_Fighting int outer 0
/declare RV_TargetDead int outer 0
/declare RV_MyXLOC int outer 0
/declare RV_MyYLOC int outer 0
/declare AnchorX int outer ${Me.X}
/declare AnchorY int outer ${Me.Y}
/declare RV_FastRange int outer
/declare RV_RangeMax int outer
/declare RV_RangeMin int outer
/varcalc RV_FastRange ${RV_Range}+3
/varcalc RV_RangeMax ${RV_Range}+1
/varcalc RV_RangeMin ${RV_Range}-1
:Start
/doevents
/call GMCheck
/call GetTarget
:KillAdds
/if (${RV_HasTarget}) /call MoveToMob
/if (${RV_HasTarget}) /call CombatSub
/if (${RV_HasTarget}) /call MoveToMob
/if (${RV_HasTarget} && (${Defined[RV_LootArray]} || ${RV_LootAllItems})) /call LootMob
/if (${RV_DisplayStats}) /call DisplayStats
/call ResetSub
/varset RV_RandomWait ${Math.Rand[5]}
/varcalc RV_RandomWait ${RV_RandomWait}+1
/echo Paranoia - Waiting ${RV_RandomWait} seconds before resuming
/delay ${RV_RandomWait}s
/if (${Target.ID}) {
/echo Looks like something is attacking us, killing it...
/delay 1s
/varset RV_HasTarget 1
/varset RV_Fighting 1
/goto :KillAdds
}
/goto :Start
/return
|--------------------------------------------------------------------------------
|SUB: Aquire Target
|--------------------------------------------------------------------------------
Sub GetTarget
/declare RV_CurrentRadius int local
/declare RV_TargetSub int local
:Acquire
/for RV_CurrentRadius 100 to ${RV_MaxRadius} step 100
/for RV_TargetSub 1 to ${RV_MobArray.Size}
/squelch /target ID ${NearestSpawn[1, npc].ID}
/varset RV_MyTargetID ${Target.ID}
/varset RV_MyTargetDead 0
/if (${Target.ID}) {
/if (${Int[${Target.PctHPs}]}<100) {
/echo Mob NOT a Full Health, picking another...
/varset RV_InvalidTargetID ${Target.ID}
/call ResetSub
/goto :Acquire
}
/if (${Int[${Target.Z}]}<${RV_MinZRange}) {
/echo Mob is BELOW Min Z Range, picking another...
/varset RV_InvalidTargetID ${Target.ID}
/call ResetSub
/goto :Acquire
}
/if (${Int[${Target.Z}]}>${RV_MaxZRange}) {
/echo Mob is ABOVE Max Z Range, picking another...
/varset RV_InvalidTargetID ${Target.ID}
/call ResetSub
/goto :Acquire
}
/varset RV_HasTarget 1
/varset RV_MyTargetName ${Target.CleanName}
/echo Acquired ${Target.CleanName} at range ${Int[${Target.Distance}]}
/return
}
/next RV_TargetSub
/delay 2
/next RV_CurrentRadius
/if (!${Target.ID}) {
/delay 2s
/varcalc RV_FailCounter ${RV_FailCounter}+1
/echo Failed to Acquire Target in Range ${RV_MaxRadius} ${RV_FailCounter} Time(s)
/if (${RV_FailCounter}>=${RV_FailMax}) {
/echo Waiting for Respawns, Resetting Failure Counter...
/delay 60s
/varset RV_FailCounter 0
}
/goto :Acquire
}
/return
|--------------------------------------------------------------------------------
|SUB: GM Check
|--------------------------------------------------------------------------------
Sub GMCheck
/if (${Spawn[gm].ID}) {
/beep
/beep
/beep
/echo GM has entered the zone!
/echo FUCK HIM but ending the macro...
/keypress forward
/keypress back
/quit
/endmacro
}
/return
|--------------------------------------------------------------------------------
|SUB: Where's the group?.
|--------------------------------------------------------------------------------
Sub CheckAnchor
/if (${Math.Distance[${AnchorY},${AnchorX}]}>12) /call MoveToAnchor
/return
|--------------------------------------------------------------------------------
|SUB: Move back to group.
|--------------------------------------------------------------------------------
Sub MoveToAnchor
/declare iCount int local
/varset iCount 0
/echo Moving to Anchor at Loc: ${AnchorY}, ${AnchorX}.
:AnchorMoveLoop
/delay 1
/doevents
/face nolook loc ${AnchorY},${AnchorX}
/if (${Math.Distance[${AnchorY},${AnchorX}]}>12) {
/keypress forward hold
} else {
/keypress forward
/face away loc ${AnchorY},${AnchorX}
/return
/goto :combatloopb
}
/if (${iCount}>2) {
/face nolook loc ${AnchorY},${AnchorX}
/varset iCount 0
}
/varcalc iCount ${iCount}+1
/goto :AnchorMoveLoop
/return
|--------------------------------------------------------------------------------
|SUB: Obstacle Avoidance
|--------------------------------------------------------------------------------
Sub HitObstacle
/echo Obstacle hit, moving around it...
/keypress forward
/keypress back hold
/delay 3
/keypress back
/if (${Math.Rand[100]}+1>50) {
/keypress strafe_right hold
} else {
/keypress strafe_left hold
}
/delay 5
/keypress strafe_right
/keypress strafe_left
/keypress forward hold
/return
|--------------------------------------------------------------------------------
|SUB: Reset
|--------------------------------------------------------------------------------
Sub ResetSub
/keypress esc
/keypress esc
/keypress esc
/keypress esc
/varset RV_HasTarget 0
/varset RV_TargetDead 0
/varset RV_Fighting 0
/return
|--------------------------------------------------------------------------------
|SUB: Moving
|--------------------------------------------------------------------------------
Sub MoveToMob
/varset RV_MyXLOC ${Int[${Me.X}]}
/varset RV_MyYLOC ${Int[${Me.Y}]}
/declare RV_DistanceTimer timer 15
/doevents
:MovementLoop
/if ((!${RV_Fighting})&&(!${RV_TargetDead})&&(${Target.PctHPs}<100)) {
/echo Mob not at full health, picking another...
/varset RV_InvalidTargetID ${Target.ID}
/varset RV_HasTarget 0
/call ResetSub
/return
}
/if (${Target.ID}) {
/face fast
}
/if (${Int[${Target.Distance}]}>${RV_FastRange}) {
/keypress forward hold
}
/if (${Int[${Target.Distance}]}<${RV_FastRange}&&${Int[${Target.Distance}]}>${RV_RangeMax}) {
/keypress forward
}
/if (${Int[${Target.Distance}]}<${RV_RangeMin}) {
/keypress back
}
/if (!${RV_DistanceTimer}) {
/if ((${RV_MyXLOC}==${Int[${Me.X}]})&&(${RV_MyYLOC}==${Int[${Me.Y}]})) /call HitObstacle
/varset RV_MyXLOC ${Int[${Me.X}]}
/varset RV_MyYLOC ${Int[${Me.Y}]}
/varset RV_DistanceTimer 15
/goto :Movementloop
}
/if (${Int[${Target.Distance}]}>${RV_FastRange}) /goto :MovementLoop
/return
|--------------------------------------------------------------------------------
|SUB: Combat
|--------------------------------------------------------------------------------
Sub CombatSub
/echo Attacking Mob NOW!
/varset RV_Fighting 1
/varset RV_TargetDead 0
:CombatLoopa
/doevents
/attack on
/call CheckAnchor
/call MoveToMob
/call SpecialIT
:CombatLoopb
/doevents
/attack on
/if (!${Target.ID}) {
/attack off
/keypress forward
/keypress back
/varset RV_TargetDead 1
/varset RV_Fighting 0
/delay 1s
/target radius 30 corpse
/delay 1s
/if (!${Target.ID}) {
/call ResetSub
/return
}
/face fast
}
/if (!${RV_TargetDead}) {
/goto :CombatLoopb
}
/return
|--------------------------------------------------------------------------------
|SUB: Special Combat
|--------------------------------------------------------------------------------
Sub SpecialIt
/declare TempID int inner 0
/if ((${Target.Distance}<11)&&(${Me.AbilityReady["Taunt"]})) /doability "Taunt"
/if ((${Int[${Me.PctHPs}]}<50)&&(${Me.Gem["Light of Nife"]})&&(${Me.SpellReady["Light of Nife"]})) {
/varset TempID ${Target.ID}
/keypress forward
/keypress back
/keypress F1
/echo Casting Heal Spell because of low health...
/cast "Light of Nife"
/delay 3s
/target id ${TempID}
}
/returnIt find a mob and pulls it back to starting location, if the mob doesn't make it to starting point it run back to bob to attack and kill it where it is. The player most of the time just runs right past and keeps going till the mob dies.
Anyway to fix this so
1. It doesn't over run the mob next time around
2. Loots whatever item you put in string
ex. /macro "thismacro theitem"
